PCB calculators: trace impedance, crosstalk, diff skew, crystal load cap, Vout tolerance, inrush. Connect the official Circuit Sim Lab (電路模擬實驗室) MCP server to Claude, ChatGPT, or Cursor through gate — one gateway URL, no config files, security-checked.
Free to start · No credit card · No hosting needed
Pick your client. Copy, paste, done — or let gate handle sign-ins and policies for you.
claude mcp add --transport http circuit-sim-lab https://circuit-sim.enscon.ai/mcpRun in your terminal, then restart Claude Code.
Circuit Sim Lab (電路模擬實驗室) · https://circuit-sim.enscon.ai/mcp
Real prompts you can type the moment it's connected — no setup, no docs to read.
“Use “impedance”: 用 2D 電場數值解算微帶線或帶狀線的差動阻抗(Zdiff、Zcomm、奇/偶模)或單端阻抗(Z0),含銅厚。回傳附適用範圍。.”
“Use “crosstalk”: 兩條耦合線的串音:偶/奇模阻抗用 2D 電場數值解,再算近端串音係數 kb、飽和比例、遠端串音係數。只回傳解析式的部分(不含工具頁的 ngspice 時域波形)。.”
“Use “diff_skew”: 兩條線的長度差換成時間差(ps),對照介面規範的限制(USB3/PCIe/DisplayPort/HDMI,限制值附原廠文件出處)。.”
“Use “xtal_load_cap”: 外掛電容 C1、C2 與雜散電容算出實際負載電容 CL、頻率偏移 ppm、振盪增益餘裕、驅動功率,並給出剛好對上規格 CL 的電容值。.”
Every server in the gate directory has to pass the same four checks before your AI can touch it. Here's how Circuit Sim Lab (電路模擬實驗室) holds up.
Operated by Circuit Sim Lab (電路模擬實驗室) (enscon.ai) at its documented MCP endpoint — not a third-party mirror or community re-host.
This server only exposes public data — no account and no credentials are involved when you connect.
gate checks every tool for prompt injection, hidden instructions, data-exfiltration hints, and over-broad permissions before the server is available through your gateway.
If Circuit Sim Lab (電路模擬實驗室) adds or changes tools later, gate re-scans and alerts you — before your AI acts on the change.
Add one gateway URL to Claude, ChatGPT, or any MCP client. One-time setup, about two minutes.
Choose Circuit Sim Lab (電路模擬實驗室) in the gate directory. No sign-in needed.
Circuit Sim Lab (電路模擬實驗室)'s tools are live in every AI client you've connected — with rules and logging built in.
Free to start · No credit card · No hosting needed
Fetched live from the official endpoint and re-checked daily by gate — not marketing copy.
impedance — 用 2D 電場數值解算微帶線或帶狀線的差動阻抗(Zdiff、Zcomm、奇/偶模)或單端阻抗(Z0),含銅厚。回傳附適用範圍。
crosstalk — 兩條耦合線的串音:偶/奇模阻抗用 2D 電場數值解,再算近端串音係數 kb、飽和比例、遠端串音係數。只回傳解析式的部分(不含工具頁的 ngspice 時域波形)。
diff_skew — 兩條線的長度差換成時間差(ps),對照介面規範的限制(USB3/PCIe/DisplayPort/HDMI,限制值附原廠文件出處)。
xtal_load_cap — 外掛電容 C1、C2 與雜散電容算出實際負載電容 CL、頻率偏移 ppm、振盪增益餘裕、驅動功率,並給出剛好對上規格 CL 的電容值。
output_voltage_tolerance — 回授電阻分壓的輸出電壓:最壞情況(每項取上下限的所有組合)、RSS 統計;可選蒙地卡羅超規比例。
inrush_current — 負載開關控速上升時的充電電流、峰值電流、能量與脈衝 I²t(mode=slew),或電容直接接電源時的串聯 R-L-C 步階電流(mode=direct)。
https://circuit-sim.enscon.ai/mcpYes — Circuit Sim Lab (電路模擬實驗室) operates its own remote MCP server at circuit-sim.enscon.ai. gate connects you to that official endpoint and adds security scanning, per-tool access rules, and an activity log on top.
Add gate's gateway URL to your AI client once, then pick Circuit Sim Lab (電路模擬實驗室) in the directory. No account or sign-in is needed. From then on, Circuit Sim Lab (電路模擬實驗室)'s tools are available in every client you've connected to gate.
No. Circuit Sim Lab (電路模擬實驗室) runs the server, and gate is fully managed. You just connect one URL — there's nothing to install, deploy, or maintain.
It's the vendor's official endpoint, and gate scans its tools for prompt injection and hidden instructions before it goes live, re-checks it whenever it changes, and lets you allow, block, or require approval for every single tool.
Yes — you can get started with gate for free and connect Circuit Sim Lab (電路模擬實驗室) in minutes. No credit card required.
Every server below works through the same gateway URL — connect once, add tools anytime.
Set up Circuit Sim Lab (電路模擬實驗室) in: Claude · Claude Code · ChatGPT · Cursor · VS Code
One URL. All MCPs. Full control. Free to start.
Get started free